MAC Aura XB

Extra-bright version of the successful MAC Aura

The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash. Not only does the MAC Aura XB offer additional brightness, it also features a new superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effect is also part of the package.

• Super bright single lens wash with fully premixed color
• Compact design and low weight
• High efficiency, low power consumption, long service life

*SPECIFICATIONS*

• Physical

  Width (across yoke): 302 mm (11.89 in.)
  Width (base): 222 mm (8.74 in.)
  Height (head straight up): 332 mm (13.07 in.)
  Height (maximum): 390 mm (15.35 in.)
  Depth (head): 163 mm (6.42 in.)
  Depth (base): 138 mm (5.43 in.)
  Minimum center-to-center distance in side-by-side installation: 330 mm (12.99 in.)
  Weight: 6.5 kg (14.4 lbs)

  Dynamic Effects

  Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe/pulse/burst, instant open and blackout
  Beam Dimming options: Choice of four dimming curves
  Beam Color Mixing: RGB (RGBW in Raw Mode), independently variable 0 - 100%
  Beam Color Temperature Control: Variable 2,500 – 10,000 K
  Beam Virtual Color wheel: 33 color presets, continuous rotation & random color
  Zoom: Motorized with 1:6 zoom ratio
  Pan: Motorized 540DEG
  Tilt: Motorized 232DEG
  Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe/pulse/burst effects, instant open and blackout
  Aura Dimming options: Choice of four dimming curves
  Aura Color Mixing: RGB, independently variable 0 - 100%
  Aura Virtual Color wheel: 33 color presets, continuous rotation & random color
  Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined

  Control and Programming

  Control Protocols: DMX and RDM
  DMX Modes: Standard & Extended
  DMX Channels: 14 & 25
  16-bit Controllable Parameters: Pan and Tilt
  Setting and Addressing: Display Menu or RDM
  Local User Interface: Backlit LCD Display
  DMX Compliance: USITT DMX512-A
  RDM Compliance: ANSI/ESTA E1.20
  DMX/RDM Transceiver: Galvanic-isolated RS-485
  Firmware Update: via DMX using Martin Companion

  Optics

  Front Lens Diameter: 200 mm (7.87 in.)
  Zoom Range: 1:6
  Full Zoom Range at Half Peak (Beam Angle): 9.0DEG - 41.7DEG
  Full Zoom Range at Tenth Peak (Field Angle): 10.3DEG - 59.1DEG
  Beam Light Source: 19 x 15 W RGBW LED
  Aura Light Source: 30 x 0.3 W RGB LED
  Max. Total Beam LED Engine Power: 285 W
  Max. Total Aura LED Engine Power: 9 W
  Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
  *Figure obtained under manufacturer's test conditions

  Photometric Data

  Light Engine Luminous Output: 10,000 lumens
  Fixture Luminous Output Wide: 6,000 lumens
  Fixture Luminous Output Narrow: 4,300 lumens
  Peak Luminous Intensity Narrow: 220,000 cd
  CCT: Variable 2,500 K – 10,000 K (+/- 200 K)
  CRI (Color Rendering Index): = 67
  CQS (Color Quality Scale): = 82
  TM-30 Rf (IES TM-30-15 Fidelity Index): = 76
  TM-30 Rg (IES TM-30-15 Gamut Index): = 119
  TLCI (Television Lighting Consistency Index): = 48
  Beam LED Refresh Rate: 1,200 Hz
  Aura LED Refresh Rate: 4,395 Hz
  Binning: Tight color and flux binning
  Calibration: Full Gamut Color Calibration of Beam and Aura
  Color Modes: Extended Color Mode, Calibrated Color Mode and Raw Color Mode
  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25DEGC ambient
  * All Photometric Data measured at 6500 K white

  Construction Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA Color: Black Protection rating: IP20
  Installation Mounting points: M12 threaded hole for rigging clamp and attachment points for surface-mounting bracket Location: Indoor Orientation: Any Minimum distance to combustible materials: 0.2 m (7.87 in.) Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)
  Connections AC mains power in/thru: Neutrik powerCON TRUE1 DMX and RDM data in/thru: Neutrik 5-pin locking XLR
  Electrical

  AC power: 100-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.7 A
  Power Factor: 0.99 @ 100 V / 120 V , 0.97 @ 208 V , 0.95 @ 230 V / 240 V
  Max current draw: 3.8 A @ 100 V / 120 V , 1.8 A @ 208 V / 230 V / 240 V
  Typical current draw: 3.8 A @ 100 V , 3.2 A @ 120 V , 1.8 A @ 208 V , 1.7 A @ 230 V , 1.6 A @ 240 V *
  Power Consumption
  Maximum: 400 W
  Typical: 359 W *
  Idle: 25 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.

• Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40DEG C (104DEG F) Minimum ambient temperature (Ta min.): 5DEG C (41DEG F) Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
  Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 28.9 dB(A)
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 26.7 lm/W LWR*: 923 lm/kg (417 lm/lb)

  LWR = Lumen-to-Weight Ratio

  Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 United Kingdom: UKCA Thailand: TIS
  Included Items

  M12 bolt suitable for use with Martin rigging clamps
  User Manual in Eng/Fre/Ger