MAC Quantum Profile

Bright white LED spot with quick and precise CMY color mixing

*SPECIFICATIONS*

• Physical Length: 452 mm (17.8 in.) Width: 431 mm (17.0 in.) across yoke Height:

  642 mm (25.3 in.) head straight up
  648 mm (25.5 in.) maximum

  Weight: 23.2 kg (51.1 lbs.)
  Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 color filters plus open Beam effects: Rotating three-facet prism Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake Iris: 0 - 100%, pulse effects Zoom: Motorized Shutter effect: Electronic, with variable speed regular and random strobe Electronic dimming: Four dimming curve options Pan: 540DEG Tilt: 268DEG Pan and tilt speed: Adjustable via onboard control panel and DMX Focus: Motorized, with zoom-focus tracking
  Control and Programming Control systems: DMX Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt Setting and addressing: Control panel with backlit graphic display RDM: Implemented DMX channels: 19/27 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485 Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo DMX Interface Box
  Optics Zoom range: 12DEG - 36DEG (1:3) Light source: 475 W LED engine Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED refresh rate: 3000 Hz Default color temperature: 6000 K Output: 12,700 lumens *Figure obtained under manufacturer's test conditions
  Photometric Data

  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25DEGC ambient.

  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
  Installation Mounting points: 4 pairs of quarter-turn locks Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m Minimum distance to illuminated surfaces: 2.0 m
  Connections AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR
• Electrical

  AC power: 120-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
  Power Factor: 0.99 @ 120 V / 208 V / 230 V / 240 V
  Typical current draw: 4.8 A @ 120 V , 2.8 A @ 208 V , 2.5 A @ 230 V , 2.4 A @ 240 V *
  Power Consumption
  Maximum: 750 W
  Typical: 576 W *
  Idle: 50 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.

  Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40DEG C Minimum ambient temperature (Ta min.): 5DEG C Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 21 LWR*:

  LWR = Lumen-to-Weight Ratio

  Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 Thailand: TIS
  Included Items 2 x Omega brackets for rigging clamp attachment: P/N 91602001