zoom_in
- DESCRIPTION
- SPECIFICATIONS
SXP118
1 x 18" Powered Portable Subwoofer
The SXP118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE! full-range system to 40Hz — providing exceptional low frequency impact and increasing headroom. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure. The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. With a maximum SPL capability of 135dB peak at 1 metre, the SXP118 is the ideal subwoofer for theatre and portable live sound applications, as well as premium installations that require the maximum output from a compact enclosure.
Features
- Compact, self-powered subwoofer
- 1 x 18” (460mm) driver with 4” (100mm) voice coil
- Onboard Class D amplification and DSP
- Dante™ Digital Audio networking
- Global mains operation with Power Factor Correction
- Tour-grade plywood enclosure with flying inserts
- IP24 rating option with rain cowl
Applications
- Live sound reinforcement
- Theatre sound
- Corporate AV events
- Fixed installations in concert halls, ballrooms and HoW
- Bars and clubs
- Outdoor restaurant, bar and hotel entertainment areas
- Concourses and Theme Parks
A self-powered system, the SXP118 incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks. The onboard amplifier delivers 2000W peak output to the driver, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain and preset selection — can be controlled over Ethernet from a PC or Windows tablet via intuitive VU-NET™ proprietary software.
For simple set-ups, ‘plug-and-play’ presets for operation with the CDD-LIVE 8, CDD-LIVE 12 or CDD-LIVE 15 — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. Additional presets provide the appropriate settings for the rear-facing subwoofer in a cardioid pair.
As an alternative to its analogue inputs, the SXP118 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run.
The enclosure is constructed from multi-laminate plywood with a durable polyurea coating and equipped with a perforated Zintec grille, twin grab handles, skids, M10 flying inserts and a threaded pole socket.
The product is supplied as standard without cabinet wheels, but they are available as an accessory.
By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.
*SPECIFICATIONS*
Acoustics
TYPE
- Compact, direct radiating powered subwoofer
FREQUENCY
RESPONSE (3)
- 47Hz – 150Hz +/-3dB, -10dB @ 41Hz
DRIVER
- 18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet, waterproof cone
INPUT SENSITIVITY
- -20dBu for 100dB SPL (CDD12/15 pre-set)
- -13dBu for 100dB SPL (CDD8 pre-set)
MAXIMUM SPL (4)
- 132dB continuous / 135dB peak
DISPERSION
- Omnidirectional / or Cardioid (paired)
CROSSOVER
- Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired)
Module
Audio input
CONNECTORS
- Female XLR input, male XLR link output, Dante Audio Neutrik Ethercon
ANALOGUE INPUT IMPEDANCE
- 20 kO balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL
- 24.6 Vpp (+21dBu), over voltage protected
Internal Processing
- Multi-channel DSP, programmable via TCP/IP using VU-Net software
- PEQ/shelving filters
- Up to 48dB/Oct LPF
- Up to 200ms input delay
- Pre-set selection via rear panel switch
Network
CONNECTORS
- 2 x Neutrik Ethercon
PROTOCOL
- TCP/IP and UDP/IP
Amplifier Module
TYPE
- 2 channel switch-mode, class D,
Bridged Tied
PEAK OUTPUT POWER
- 2000W total
AVERAGE EFFICIENCY
- 89%
COOLING
- External fan
MAXIMUM AMBIENT TEMPERATURE
- 40DEGC (104DEGF) for full output
Power Supply
TYPE
- Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE
- 85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR
- > 0.98
NOMINAL POWER CONSUMPTION
- 550W
MAINS CONNECTOR
- Neutrik Powercon True1
Mechanical
ENCLOSURE
- Extensively braced multi-laminate plywood.
FINISH
- Durable Polyurea Coating
PROTECTIVE GRILLE
- Black perforated Zintec
FITTINGS
- Two skids on base, with mating channels on top
- 16 x M8 inserts for optional castors
- M20 top-mounted thread plate for pole mounting
- 16 x M10 mounting points
- 2x Bar handles, 1 on each side
- 4x fittings for optional transit cover
IP RATING
- IP24 factory option available
DIMENSIONS
- (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors)
- (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors)
WEIGHT
- 46.5kg (103lbs) w/o castors 50kg (110lbs) with castors