• Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent.


• Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers,
  arranged coaxially.


• Patent-pending Constant Beamwidth Technologyâ„¢ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.


• Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for
  long-throw applications.


• Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.


• Dynamic SonicGuardâ„¢ overload protection of HF devices


• Swivel (pan) / tilt wall bracket included.
  

*SPECIFICATIONS*

Components
Four 130 mm (5 in) LF drivers
Sixteen 25 mm (1 in) HF drivers

Frequency Range (-10 dB)
60 Hz – 20 kHz

Coverage
Vertical (selectable via switch)
Narrow Mode: 25° (2 kHz - 16 kHz) (±10°)
Broad Mode: 45° (750 Hz - 16 kHz) (±10°)
Horizontal 150° (500 Hz – 8 kHz, ±20°)

Sensitivity (2.83V@ 1m)
Narrow: (speech mode) 98 dB (1 kHz - 8 kHz)
(music mode) 93 dB (300 Hz - 18 kHz)
Broad: (speech mode) 96 dB (1 kHz - 8 kHz)
(music mode) 92 dB (300 Hz - 18 kHz)

Nominal Impedance
8 ohms

Power Capacity
500 W (2000 W peak), 2 hrs
350 W (1400 W peak), 100 hrs

Max SPL
Narrow: (speech mode) 125 dB cont ave (131 peak)
(music mode) 120 dB cont ave (126 peak)
Broad: (speech mode) 123 dB cont ave (129 peak)
(music mode) 119 dB cont ave (125 peak)

Transducers


Low Frequency Drivers
4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance, shielded.

High Frequency Drivers
16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded.

Enclosure
Fiberglass reinforced ABS cabinet, painted aluminum grille

Outdoor Capability
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors
Black or white (-WH)

Insert Points
10 M6 swivel (pan)/tilt (16 mm deep) insert points on back panel.

Mounting
Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/-15 degree tilt, as well as 5 degree fixed increment points. Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for OmniMount® 60.0 and other compatible third-party brackets. Threaded mounting points can be utilized
for suspension.

Dimensions (H x W x D)
694 x 170 x 237 mm
(27.4 x 6.7 x 9.3 in)

Net Weight
9.5 kg (21 lb)

Included Accessories
Swivel (pan) / tilt wall bracket

Optional Accessories
MTC-PC2 terminal panel cover
MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty
speaker stand
MTC-CBT-FM2 flush-mount low-profile wall-mount bracket