The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.
- Video shielded for use near video monitors.
- Extremely smooth frequency response.
- Stainless steel grill for harsh environments.
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
- SonicGuard overload protection.
- 130 mm (5.25 in) polypropylene coated woofer,
- 10 mm (.75 in) titanium coated horn-loaded tweeter.
- Includes InvisiBall mounting hardware and sealed input panel cover.
- Screw-down input terminals.
- 100 degree x 100 degree high frequency horn.
*SPECIFICATIONS*
Frequency Range : 70 Hz - 23 kHz; (-10 dB)70 Hz - 23 kHz (-10 dB)
Power Capacity : 200 W Continuous Program Power, 100 W Continuous Pink Noise
Transformer Taps : 70V: 60 W, 30 W, 15 W, 7.5 W taps (Taps #4,#3, #2 & #1) 100V: 60 W, 30 W, 15 W taps (Taps #3, #2, & #1)
Nominal Sensitivity : 87 dB SPL, 1 W @ 1 m (3.3 ft)
Midrange (±1.5 dB, typical) : 130 Hz - 14 kHz
Nominal Coverage : 100° x 100°
Maximum SPL @ 1m: 113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech
Directivity Factor (Q) : 4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI) : 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.7 ohms at 230 Hz
Crossover Network: Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
Low Frequency: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
High-Frequency: 20 mm (.75 in) titanium coated PEI
Enclosure Material: High Impact polystyrene
Grille: Painted stainless steel, black or white to match cabinet, paintable
Overload Protection: Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
Terminations: Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
Safety Agency Rating: Transformer is listed per UL1876
Colors: Black or white (-WH)
Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions
Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (ea): 4.0 kg (9 lb)
Shipping Weight (ea): 9.0 kg (20 lb) per pair
Included Accessories: 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
zoom_in
