The PRO 42’s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

• Low-profile design for minimum visibility


• Wide-range condenser element with low-mass diaphragm for superior performance


• Self-contained electronics eliminate need for external power modules


• Rugged design and construction


• 25' (7.6 m) detachable cable (TA3F to XLRM-type)

*SPECIFICATIONS*

ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE: 70-16,000 Hz
OPEN CIRCUIT SENSITIVITY: -38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms

MAXIMUM INPUT SOUND LEVEL: 114 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 86 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 66 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 9-52V, 2 mA typical
WEIGHT: 2.4 oz (67 g)
DIMENSIONS: 2.87" (73.0 mm) maximum width,
3.56" (90.5 mm) maximum length,
0.59" (15.0 mm) height
OUTPUT CONNECTOR: TB3M-type
CABLE: 25' (7.6 m) long, with TA3F and XLRM-type connectors