zoom_in
*SPECIFICATIONS*
Stereo FTC Power
8 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 1050 W
8 ohms / EIA 1,000 Hz / 0.1% THD: 1100 W
4 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 1600 W
4 ohms / EIA 1,000 Hz / 0.1% THD: 1800 W
2 ohms / EIA 1,000 Hz / 1% THD: 2500 W
Bridge
8 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 3200 W
8 ohms / EIA 1,000 Hz / 0.1% THD: 3600 W
4 ohms / EIA 1,000 Hz / 1% THD: 5000 W
Input Connectors: Active balanced 1/4" TRS, Balanced XLR, Euro-style detachable terminal block
Output Connectors: Touch-proof binding posts, NL4 Neutrik Speakon connectors
Headroom: 2 dB at 4 ohms
Distortion: SMPTE-IM: < 0.02%
Frequency Response: 20 to 20,000 Hz: 0/-1 dB, -3 dB Points: 5 to 50,000 Hz (LF filter bypassed / 8 ohms)
Damping Factor: >250 at 8 ohms
Noise: 100 dB below rated output from 20 to 20,000 Hz at 8 ohms
Voltage Gain: 64x (36 dB) for 8 ohms
Signal to Noise Ratio: > - 100 dB (20 to 20,000 Hz at 8 ohms)
Input Sensitivity @ 8 ohms: 1.42 V (5.3 dBu)
Input Impedance: 10 kOhms unbalanced / 20 kOhms balanced
Controls: Front: AC switch, Ch.1 and Ch.2 gain / Rear: 10-position DIP switch
Input Clipping Level: 6.4 VRMS (+18 dBu)
Indicators: Power: Blue LED, Clip: Red LED, 1 per channel, Signal: Green LED, 1 per channel
Cooling: Continuously variable speed fan, back-to-front air flow
Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection / Stable into reactive or mismatched loads, Load: Turn-on and turn-off muting/DC fault
Output Circuit: 3-tier Class H
Power Requirements: Typical, 1/8 Power Pink Noise at 4 ohms: 13.9 A / Severe, 1/3 Power Pink Noise at 4 ohms: 26.9 A
Current Consumption:
At 120 V
8 ohms
Typical: 8.7 A, Full: 17.0 A, Maximum: 34.4 A
4 ohms
Typical: 13.9 A, Full: 26.9 A, Maximum: 56.4 A
2 ohms
Typical: 18.9 A, Full: 38.0 A, Maximum: 84.7 A
Plug Type
Supplied: NEMA 5-20 (100 / 120 V), CEE7/7 (230 V)
Power Requirement: 100, 120, 230 VAC, 50 to 60 Hz (factory configured)
Dimensions (H x W x D): 5.2 x 19.0 x 15.9" (132.0 x 483.0 x 404.0 mm)
Weight: 75.0 lb (33.1 kg)
