Peachstate Audio and Lighting ® - IG4T - Portable Column - dB TECHNOLOGIES 2-WAY 4 X 6.5" ACTIVE COLUMN ARRAY SYSTEM

DESCRIPTION
SPECIFICATIONS

INGENIA IG4T

INGENIA series embodies a longtime experience in acoustics, mechanics, power electronics and DSP programming, combined with talent and intuition in order to create an unprecedented active speaker: compact, modular, flyable, user-friendly and incredibly smart.

FEATURES:

WORK AS STAND-ALONE SYSTEM OR IN COUPLE
CEC HORN TECHNOLOGY (ASYMMETRICAL VERTICAL COVERAGE)
ADVANCED DSP FEATURING LINEAR PHASE FIR FILTERS
DIGITAL STEERING COVERAGE
ELEMENT POSITION DETECTION (IR PORT)
SPEAKERS WITH NEODYMIUM MAGNETS
OLED DSP INTERFACE
UNIQUE SPEAKER LOCK SYSTEM
FIR FILTERS

The INGENIA IG4 T is equipped with 4 premium 6.5 low frequency transducers and 1 1.4"compression driver.
All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one.
Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence.
INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility.
Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs levels and input devices.
INGENIA can be easily and safely coupled through a LP-IG accessory which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation.
Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array.

SPECIFICATIONS
Technical Data

Speaker Type

2-Way Active Speaker

Acoustical data

Frequency Response [-10dB]

74- 20.000 Hz

Frequency Response [-6dB]

88 - 19.200 Hz

Max SPL

132 dB

HF

1.4"

HF Voice Coil

3"

Directivity (HxV)

110 x 90Deg (+20Deg/- 70Deg)

HF Type

Neodymium compression driver

Horn

Vertical asymmetric

Crossover Frequency

1100 Hz

LF

4x6.5”

LF Voice Coil

1.5"

LF Type

Neodymium

Amplifier

Amp Technology

Digipro G3

Amp Class

Class-D

Peak Power

1800 W

RMS Power

900 W

User Interface

OLED display + rotative knob w/switch

Self-rotating display

Yes

Positioning

EPD (Element Position Detection)

Display Mirroring

Yes

Processor

Controller

DSP 56 bit

AD/DA Converter

24bit/48kHz

System Presets

Factory presets + User defined

Limiter

Dual Active Peak, RMS, Thermal

DSP Processing

FIR Linear Phase

Input

Signal Input

1 x Combo IN (XLR + Jack 6.3mm)

Signal Out

1 x XLR link OUT

USB connector

Yes - mini USB

Mechanics

Housing

Polypropylene PP reinforced

Grille

FULL /Invisible screws

Flyable

Yes

Handles

1x on top / 1x on bottom

Pole Mount

Yes

Width

195 mm (7.68 in)

Height

956 mm (37.64 in)

Depth

271 mm (10.67 in)

Weight

18.2 Kg (40 lbs.)